Skip to content

Peplink IoT 20G 2xLTE/5G IP66 N-Type White 0.6m

Item No:
769439
MPN:
ANT-IOT-20G-N-W-2
$507.74
Payment options

This product is currently not available!

Shipping Information
  • Unavailable for shipping
  • This product is not currently available for purchase
Store Availability
  • Unavailable at Bankstown Store
  • Unavailable at Castle Hill Store
  • Unavailable at Northmead Store
Peplink IoT 20G, 1.575 - 1.602 GHz, 29 dBi, 50 Ohms, SMA antenna, N-type/SMA, Male
With 2 cellular channels, the IoT 20G is a high-gain antenna optimized for LTE/5G bands. Its IP66 enclosure and support for Band 71 makes this antenna an ideal and easy installation for remote deployments.

5G Ready
5G can reach speeds 10x faster than 4G LTE. Download movies in just seconds.

IP66 Rated and UV Proof
Certified quality protection from dust, water, and UV allows you to use it even in poor weather conditions.

10dBi High Gain
Increased signal strength for a stronger connection and less interference.

GPS Support
Includes an active and high performance GPS receiver ideal for location tracking.
Performance
Frequency band A small section of the spectrum of radio communication frequencies, in which channels are usually used or set aside for the same purpose e.g.for a channel on FM radio; for mobile networks to communicate with mobile phones. 0.6 - 6 GHz
Impedance The effective resistance of an electric circuit or component to alternating current, arising from the combined effects of ohmic resistance and reactance. 50 Ω
Antenna gain level (max) Antenna gain is the measurement of an antenna's ability to amplify the incoming microwave signals in a particular direction, compared with the sensitivity of an isotropic antenna in any direction, or a dipole antenna in the equatorial direction. 7 dBi
LNA gain 29 dB
GPS frequency 1575-1602 MHz
Features
Antenna type Type of antenna, also known an aerial, e.g. external, internal. SMA antenna
Antenna connector type The way in which the antenna is connected to the device e.g. coaxial. SMA
Connector gender To distinguish parts on a cable interface, connectors are grouped under genders. Sockets or jacks are considered to be female whilst plugs are referred to as male. Male
Voltage Standing Wave Ratio (VSWR) < 2.0
Product colour The colour e.g. red, blue, green, black, white. White
Housing material What the casing of the product is made of. Polycarbonate (PC)
International Protection (IP) code The IP code classifies and rates the degree of protection provided against the intrusion (including body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC). The digits (characteristic numerals) indicate conformity with the conditions summarized in the tables below. Where there is no protection rating with regard to one of the criteria, the digit is replaced with the letter X. an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. Another example is the Sony Xperia Z Ultra, one of the first cellular phones to be IP-rated; it is rated at IP58 and marketed as "dust resistant" and can be "immersed in 1.5 meter of freshwater for up to 30 minutes". IP66
Ultraviolet (UV) resistant
Power handling 5 W
Cable length How long the cable is. 0.5 m
Mounting What size the mounting head of the product is, to couple it with a camera. Wall/Pole
Maximum cable loss with connectors 10 dB
Mounting pipe 25 - 50 mm
Power
Power consumption 9 mA
Input voltage The voltage (V) which is required to power the product. 3.3 V
Certificates
Compliance certificates RoHS
Operational conditions
Operating temperature (T-T) The minimum and maximum temperatures at which the product can be safely operated. -40 - 80 °C
Storage temperature (T-T) The minimum and maximum temperatures at which the product can be safely stored. -40 - 80 °C
Weight & dimensions
Width The measurement or extent of something from side to side. 301.3 mm
Depth The distance from the front to the back of something. 77 mm
Height The measurement of the product from head to foot or from base to top. 325.3 mm
Packaging data
Package width The distance from one side of the packaging to the other. 310 mm
Package depth The distance from the front to the back of the packaging. 145 mm
Package height The distance from the top to the bottom of the packaging. 360 mm
Packaging content
Quantity per pack 1 pc(s)
More Information
SKU 769439
MPN ANT-IOT-20G-N-W-2
Brand Peplink
Product Condition Brand New/Unused
Product Use General
Warranty Period 1 Year Warranty
Warranty Contact https://www.peplink.com/