Shipping Information
- Unavailable for shipping
- This product is not currently available for purchase
Store Availability
- Unavailable at Bankstown Store
- Unavailable at Castle Hill Store
- Unavailable at Northmead Store
Lexmark SPD0002, 1750 J, 1 AC outlet(s), C14 coupler, 220-240 V, 50 - 60 Hz, 1800 W
Smart surge protection for Lexmark laser printers and MFPs
Avoid damage from power line and telecom surges with the Lexmark Surge Protective Device, designed specifically for Lexmark's full line of laser printers and MFPs.
Two-way protection
Using industrial-grade components, the Lexmark Surge Protective Device shuts off damaging current spikes before they can reach your Lexmark laser printer or MFP. Telecom lines can carry device-damaging surges too, so our surge protector stands guard over the fax line going into your Lexmark MFP.
Upgraded circuit board
Unlike typical consumer-grade surge protectors, the Lexmark Surge Protective Device's printed circuit board has two layers of glass fibre for better flame resistance, plus thicker two-ounce copper plating to spread and dissipate heat better. There's also insulating tape and fibreglass component covers for an additional layer of heat protection during a surge event.
Quality enclosure
Lexmark's specially-designed surge protector enclosure offers higher flame resistance than many consumer surge protectors. Plus, it has reinforced insulation construction with double retention features and is welded shut to resist tampering.
Short-circuit protection
Thermal cut-off fuses reduce the chance of short circuits if a sustained or exceptionally large surge causes internal component temperatures to rise to undesirable levels.
The right connections
The built-in 1.5 metre IEC appliance coupler cord attaches directly to a Lexmark device's power connector, while the appliance inlet accepts your Lexmark device's existing power cord.
Protection status LED
A blue LED indicates protection when lit and need for replacement when unlit.
Avoid damage from power line and telecom surges with the Lexmark Surge Protective Device, designed specifically for Lexmark's full line of laser printers and MFPs.
Two-way protection
Using industrial-grade components, the Lexmark Surge Protective Device shuts off damaging current spikes before they can reach your Lexmark laser printer or MFP. Telecom lines can carry device-damaging surges too, so our surge protector stands guard over the fax line going into your Lexmark MFP.
Upgraded circuit board
Unlike typical consumer-grade surge protectors, the Lexmark Surge Protective Device's printed circuit board has two layers of glass fibre for better flame resistance, plus thicker two-ounce copper plating to spread and dissipate heat better. There's also insulating tape and fibreglass component covers for an additional layer of heat protection during a surge event.
Quality enclosure
Lexmark's specially-designed surge protector enclosure offers higher flame resistance than many consumer surge protectors. Plus, it has reinforced insulation construction with double retention features and is welded shut to resist tampering.
Short-circuit protection
Thermal cut-off fuses reduce the chance of short circuits if a sustained or exceptionally large surge causes internal component temperatures to rise to undesirable levels.
The right connections
The built-in 1.5 metre IEC appliance coupler cord attaches directly to a Lexmark device's power connector, while the appliance inlet accepts your Lexmark device's existing power cord.
Protection status LED
A blue LED indicates protection when lit and need for replacement when unlit.
| Power | |
| Surge energy rating A surge protector is an appliance designed to protect electrical devices from voltage spikes. A surge protector attempts to limit the voltage supplied to an electric device by either blocking or by shorting to ground any unwanted voltages above a safe threshold. The surge energy rating is a measure of how much energy a surge protector can theoretically absorb in a single event, without failure. | 1750 J |
| AC outlets quantity The number of sockets in the device where AC electrical power can be connected. | 1 AC outlet(s) |
| AC outlet types The type of outlet for AC electricity. | C14 coupler |
| Nominal input voltage The voltage which the manufacturer recommends that the device needs to operate normally. | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Peak power This is the maximum power required by the device or peak music power. | 1800 W |
| Ports & interfaces | |
| Cordless |
 |
| Features | |
| Product colour The colour e.g. red, blue, green, black, white. | Black |
| Country of origin Country where the device is made. Aka Country of manufacture (COM). | China |
| Weight & dimensions | |
| Cable length How long the cable is. | 1.5 m |
| Operational conditions | |
| Operating temperature (T-T) The minimum and maximum temperatures at which the product can be safely operated. | 0 - 43 °C |
| Operating relative humidity (H-H) | 8 - 80% |
| Certificates | |
| Certification | UL 1449-1:2014 4th Edition, IEC/EN 61643-11:2002, IEC/EN 61643-21:2012 |
| Indication | |
| LED indicators | Status |
| Packaging data | |
| Package dimensions (WxDxH) | 135 x 243 x 60 mm |
| Package weight Weight of the packaged product. | 465 g |
| Packaging content | |
| Number of products included The number of products that are included in the package. | 1 pc(s) |
| Cables included | Phone (RJ-11) |
| Logistics data | |
| Harmonized System (HS) code | 85364900 |
| SKU | 817415 |
| MPN | SPD0002 |
| Brand | Lexmark |
| Product Condition | Brand New/Unused |
| Product Use | General |