- Available for shipping
- Usually leaves our partner warehouse in 2-3 business days
- 3-4 business days at Bankstown
- 3-4 business days at Blacktown
- 3-4 business days at Castle Hill
|Internal The product is built in.
|Audio output channels An audio output channel is an electric circuit which acts as a path for a signal produced by a device. A device may have several audio output channels.
|Line-out Signal-to-Noise Ratio (SNR) This is the Signal-to-Noise Ratio of the line out (output) of the device. The SNR is defined as the ratio of signal power to the noise power, often expressed in decibels. A ratio higher than 1:1 (greater than 0 dB) indicates more signal than noise.
|Line-in Signal-to-Noise Ratio (SNR)
|Digital-to-Analog Conversion (DAC)
|Line-in Total Harmonic Distortion (THD)
|Line-out Total Harmonic Distortion (THD)
|Frequency range The lowest and the hightest frequencies that can be inputted/produced.
|10 - 87000 Hz
|Ports & interfaces
|Host interface Interface that enables a host controller to communicate with a driver.
|Headphone outputs Number of sockets /ports where headphones are connected.
|S/PDIF out port S/PDIF (Sony/Philips Digital Interconnect Format) is a digital audio interconnect used in consumer audio equipment over relatively short distances. The signal is transmitted over either a coaxial cable with RCA connectors or a fibre optic cable with TOSLINK connectors.
|Total Harmonic Distortion (THD) Total harmonic distortion is a measure of non-linear harmonic distortion and is given in %. Non-linear harmonic distortions are signals which were not present in the original before the signal was converted by the headphones. These unwanted signals are caused by the diaphragm, whose movements do not precisely move in time with the electric signals that cause it to move. Unfortunately, this is a feature of all electroacoustic transducers. Although it cannot be completely eliminated, suitable steps can be taken to minimise it. However, the user is not interested in why this distortion takes place but in how great the level of distortion must be for it to become perceptible. According to the findings of several research projects, a total harmonic distortion of 1% in the frequency range of 100 to 2000 Hz is imperceptible. Below 100 Hz, the perceptibility threshold lies at 10%.
|Product colour The colour e.g. red, blue, green, black, white.
|Windows operating systems supported Windows vesions wich can be used with the device.
|Windows 10,Windows 7,Windows 8,Windows 8.1
|Quick start guide Instructions, either online, as a computer program or in paper form, to allow you to set up and start using the product quickly.
|Available for Shipping
|3 Years Warranty