Synology RX1217RP RackStation Expansion add on 12 with Redundant Power
Synology RX1217RP RackStation Expansion add on 12 with Redundant Power - Synology® RX1217RP delivers an effortless solution for data volume expansion and data backup for Synology 2U RackStation NAS.With additional 12 drive bays, RX1217RP seamlessly expands the storage capacity of the connected Synology NAS on the fly with redundant power.
Installed storage drive type Type of storage drives built into the device e.g. HDD (hard disk drive), SSD (solid-state drive).
Supported storage drive interfaces
Serial ATA,Serial ATA II,Serial ATA III
Data transfer rate Rate at which data can be transferred. Usually expressed in units per second. May vary with network configurations.
Number of fans The quantity of fans (apparatus with rotating blades that creates a current of air for cooling or ventilation).
Noise level The amplitude level of the undesired background noise, usually measured in decibels (db).
RoHS compliance The Restriction of Hazardous Substances (RoHS) Directive aims to restrict certain dangerous substances commonly used in electrical and electronic equipment. Any RoHS compliant product is tested for the presence of Lead (Pb), Cadmium (Cd), Mercury (Hg), Hexavalent chromium (Hex-Cr), Polybrominated biphenyls (PBB), and Polybrominated diphenyl ethers (PBDE). PBB and PBDE are flame retardants used in several plastics. For Cadmium and Hexavalent chromium, there must be less than 0.01% of the substance by weight at raw homogeneous materials level. For Lead, PBB, and PBDE, there must be no more than 0.1% of the material, when calculated by weight at raw homogeneous materials. Any RoHS compliant component must have 100 ppm or less of mercury and the mercury must not have been intentionally added to the component. In the EU, some military and medical equipment are exempt from RoHS compliance.
FCC A, CE A, BSMI A
Power supply unit (PSU) capacity
Number of power supply units
Redundant power supply (RPS) support Additional power supply which can run a computer if the main power supply fails.
Power consumption (typical) Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
AC input frequency
50 - 60 Hz
Weight & dimensions
Operating temperature (T-T) The minimum and maximum temperatures at which the product can be safely operated.
5 - 35 °C
Operating relative humidity (H-H)
5 - 95%
|Product Condition||Brand New/Unused|
|NAS Form Factor||Rackmounted|