StarTech USB to SATA Converter for Raspberry Pi and other Dev Boards
Item No:
244293
MPN:
PIB2S31
$35.87
This item is Temporarily Unavailable
Payment options
Increase the data storage capacity of your Raspberry Pi or other development board, by connecting it directly to a SATA-based drive. Perfect for custom projects and applications, this USB to SATA converter supports all models of Raspberry Pi as well as other development boards.
Add data storage and enhanced capabilities to your development board
This convenient USB 2.0 SATA converter lets you overcome data storage limitations by enabling you to connect a SATA drive or SATA optical drive through your board?s USB-A port. This enables you to access a wide variety of storage formats including solid-state drives or hard drives, DVD-ROM drives or CD-ROM drives.
A convenient integrated solution
The USB to SATA converter integrates seamlessly with your existing development board. It?s the perfect addition for development-board based applications such as surveillance, media players and servers, digital signage and IoT/automation solutions.
Easy to install
Compatible with SATA I, SATA II and SATA III drives, the converter is easy to install, and doesn?t require any device driver installation. It comes with a USB cable and all mounting accessories, including standoffs, so integrating it with your Raspberry Pi is fast and easy.
StarTech.com provides industry-leading support to get you up and running quickly. The PIB2S31 is backed by a StarTech.com 2-year warranty and free lifetime technical support.
Raspberry Pi is a trademark of the Raspberry Pi Foundation
| Connector(s) | |
| Drive Connectors | 7 pin SATA Data Plug |
| Host Connectors | USB Micro-B (5 pin) |
| Environmental | |
| Humidity | 15% ~ 90% RH |
| Operating Temperature | 5?C to 50?C (41?F to 122?F) |
| Storage Temperature | -25?C to 70?C (-13?F to 158?F) |
| Hardware | |
| Bus Type | USB 2.0 |
| Chipset ID | Renesas - ?PD720231A |
| Compatible Drive Types | SATA |
| Interface | USB 2.0 |
| Number of Drives | 1 |
| Packaging Information | |
| Shipping (Package) Weight | 70.4 g [2.5 oz] |
| Performance | |
| ATAPI Support | Yes |
| Maximum Data Transfer Rate | 480 Mbps |
| MTBF | 6,481,043 hrs |
| Type and Rate | SATA III (6 Gbps) |
| USB 2.0 - 480 Mbit/s | |
| Physical Characteristics | |
| Color | Red |
| Product Height | 11 mm [0.4 in] |
| Product Length | 66 mm [2.6 in] |
| Product Weight | 7.6 g [0.3 oz] |
| Product Width | 23 mm [0.9 in] |
| Power | |
| Power Source | USB-Powered |
| Software | |
| OS Compatibility | OS independent; No software or drivers required |
| What's in the Box | |
| Included in Package | nuts |
| quick-start guide | |
| screws | |
| standoffs | |
| USB to SATA converter | |
| USB-A to Micro-B cable | |
Ports & interfaces
SATA revision
3.0
Design
Mean time between failures (MTBF)
Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.
6481043 h
RoHS compliance
The Restriction of Hazardous Substances (RoHS) Directive aims to restrict certain dangerous substances commonly used in electrical and electronic equipment. Any RoHS compliant product is tested for the presence of Lead (Pb), Cadmium (Cd), Mercury (Hg), Hexavalent chromium (Hex-Cr), Polybrominated biphenyls (PBB), and Polybrominated diphenyl ethers (PBDE). PBB and PBDE are flame retardants used in several plastics. For Cadmium and Hexavalent chromium, there must be less than 0.01% of the substance by weight at raw homogeneous materials level. For Lead, PBB, and PBDE, there must be no more than 0.1% of the material, when calculated by weight at raw homogeneous materials. Any RoHS compliant component must have 100 ppm or less of mercury and the mercury must not have been intentionally added to the component. In the EU, some military and medical equipment are exempt from RoHS compliance.
Certification
CE, FCC
Features
Chipset
Set of electronic components in an integrated circuit that manages the data flow between the processor, memory and peripherals. It is usually found in the motherboard of a computer. Chipsets are usually designed to work with a specific family of microprocessors. Because it controls communications between the processor and external devices, the chipset plays a crucial role in determining system performance.
Renesas - µPD720231A
Data transfer rate (max)
6 Gbit/s
Operational conditions
Operating temperature (T-T)
The minimum and maximum temperatures at which the product can be safely operated.
5 - 50 °C
Storage temperature (T-T)
The minimum and maximum temperatures at which the product can be safely stored.
-25 - 70 °C
Operating relative humidity (H-H)
15 - 90%
Weight & dimensions
Packaging data
Cables included
USB
Quick installation guide
| SKU | 244293 |
|---|---|
| MPN | PIB2S31 |
| Brand | Startech |
| Product Condition | Brand New/Unused |
