FREE SHIPPING on orders over $200 Australia Wide - some exclusions apply, click here for more details
NSW Lockdown: Our stores are open for your essential office equipment, with restrictions. Bankstown and Blacktown Stores are Click and Collect Only. Free Shipping* available Australia Wide on most orders over $200. Please allow for some delay in order processing and shipping. Please click here for more information.

StarTech 50ft Active CL2 In-wall HDMI Cable - Ultra HD 4k x 2k HDMI

Item No:
242018
MPN:
HDMM15MA
$135.87
This item is Temporarily Unavailable
Payment options

The HDMM15MA 50 ft Active High Speed HDMI® Cable features a built-in active signal booster for a connection distance of up to 50 feet (15m) between your HDMI-enabled devices, with no signal loss.

This durable yet lightweight cable features thinner HDMI wire construction that allows for a more flexible installation with minimal clutter. Plus, the cable features built-in amplifier circuitry which actively boosts the HDMI signal with no external power required.

This high quality HDMI cable fully supports 1080p+ resolutions at up to 120Hz refresh rate, with life-like color. To accommodate the demands of future high definition devices, such as increased resolutions and higher frame rates, this Ultra HD cable supports resolutions up to 4k x 2k.

This 15 meter HDMI cable is backed by StarTech.com's 2-year Warranty.

Please Note: This cable features unidirectional architecture which requires that the cable is installed in the correct direction. Please refer to the "source" and "display" labels on the HDMI connectors in order to ensure that the device and the HDMI source are connected properly.

Connector(s)
Connector AHDMI (19 pin) Male
Connector BHDMI (19 pin) Male
Hardware
Cable Jacket TypePVC - Polyvinyl Chloride
Cable Shield TypeAluminum-Mylar Foil with Braid
Chipset IDRedmere
Connector PlatingGold
Fire RatingCL2 Rated
Packaging Information
Package Quantity1
Shipping (Package) Weight1.1 kg [2.5 lb]
Performance
Maximum Digital Resolutions4K x 2K @ 30 Hz
Physical Characteristics
Cable Length15 m [49.2 ft]
Cable OD7.5 mm [0.3 in]
ColorBlack
Connector StyleStraight
Product Length15 m [49.2 ft]
Product Weight1.1 kg [2.5 lb]
Wire Gauge26 AWG
What's in the Box
Included in Package15m Active High Speed HDMI? Cable - HDMI - M/M

Features

Cable length How long the cable is.
15 m
Connector 1 This is the first connector in the device.
HDMI Type A (Standard)
Connector 2 This is the second connector in the device.
HDMI Type A (Standard)
Connector 1 gender The gender of the first connector of the product. Each half of a pair of mating connectors is assigned the designation male or female, the part bearing one or which fits into another being called male.
Male
Connector 2 gender The gender of the second connector of the product. Each half of a pair of mating connectors is assigned the designation male or female, the indented one or the one fitting around the other being called female.
Male
Connector 1 form factor
Straight
Connector 2 form factor
Straight
Product colour The colour e.g. red, blue, green, black, white.
Black
AWG wire size
28
Connector contacts plating What the connector contacts are covered with (layer on top).
Gold
Cable jacket material
Polyvinyl chloride (PVC)
Cable shielding The protective layer for the cable, typically made of plastic.
Aluminum mylar foil
Connector gender To distinguish parts on a cable interface, connectors are grouped under genders. Sockets or jacks are considered to be female whilst plugs are referred to as male.
Male/Male
RoHS compliance The Restriction of Hazardous Substances (RoHS) Directive aims to restrict certain dangerous substances commonly used in electrical and electronic equipment. Any RoHS compliant product is tested for the presence of Lead (Pb), Cadmium (Cd), Mercury (Hg), Hexavalent chromium (Hex-Cr), Polybrominated biphenyls (PBB), and Polybrominated diphenyl ethers (PBDE). PBB and PBDE are flame retardants used in several plastics. For Cadmium and Hexavalent chromium, there must be less than 0.01% of the substance by weight at raw homogeneous materials level. For Lead, PBB, and PBDE, there must be no more than 0.1% of the material, when calculated by weight at raw homogeneous materials. Any RoHS compliant component must have 100 ppm or less of mercury and the mercury must not have been intentionally added to the component. In the EU, some military and medical equipment are exempt from RoHS compliance.

Weight & dimensions

Weight Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
1.1 kg
Package width The distance from one side of the packaging to the other.
255 mm
Package depth The distance from the front to the back of the packaging.
330 mm
Package height The distance from the top to the bottom of the packaging.
58 mm
Package weight Weight of the packaged product.
960 g

Other features

Package length
13.78
Specifications
SKU 242018
MPN HDMM15MA
Brand Startech
Product Condition Brand New/Unused