StarTech 2 Port VGA Auto Switch
Item No:
214130
MPN:
ST122VGAU
$75.87
Delivery:
Dispatch 3-7 days
Store Pickup:
Check Availability
Supports resolutions up to 1920x1440, Video Bandwidth 250 MHz
The ST122VGAU VGA Auto Switcher lets you share a display between two computers and prioritize your VGA signals. The VGA switch features a primary and secondary VGA input port, and automatically outputs the signal from the primary input. When the signal feed connected to the primary input port is cut, the switcher automatically defaults to the video signal on the secondary VGA input port.
Designed for maximum control and versatility, the VGA Auto switcher also offers manual control of connected signals with easy-to-use front panel buttons that allow you to toggle between video sources.
| Connector(s) | |
| Connector A | VGA (15 pin, High Density D-Sub) Female |
| Connector B | VGA (15 pin, High Density D-Sub) Female |
| Hardware | |
| Audio | No |
| Industry Standards | DDC1, DDC2, DDC2B, DDC2B+, DDC2AB ( DDC Support on Port 1 only) |
| Ports | 2 |
| Packaging Information | |
| Shipping (Package) Weight | 0.8 kg [1.7 lb] |
| Performance | |
| Bandwidth | 250 MHz |
| MTBF | 80,000 hours |
| Wide Screen Supported | Yes |
| Physical Characteristics | |
| Color | Black |
| Enclosure Type | Steel |
| Product Height | 195 mm [7.7 in] |
| Product Length | 130 mm [5.1 in] |
| Product Weight | 930 g [32.8 oz] |
| Product Width | 56 mm [2.2 in] |
| Power | |
| Center Tip Polarity | Positive |
| Output Current | 0.3A |
| Output Voltage | 9 DC |
| Power Consumption (In Watts) | 2.7 |
| Power Source | AC Adapter Included |
| Special Notes / Requirements | |
| Note | Port 1 is set to have higher priority than port 2 when both signals are on |
| What's in the Box | |
| Included in Package | 2 Port VGA Auto Switch |
| Instruction Manual | |
| Universal Power Adapter (US/UK/EU/AUS) | |
Ports & interfaces
Video out
VGA
Connector(s)
HD15
Features
Bandwidth
Bandwidth is the difference between the upper and lower frequencies in a continuous set of frequencies. It is typically measured in Hertz (Hz). A key characteristic of bandwidth is that any band of a given width can carry the same amount of information, regardless of where that band is located in the frequency spectrum. For example, a 3 kHz band can carry a telephone conversation whether that band is at baseband (as in a POTS telephone line) or modulated to some higher frequency.
250 MHz
Power
DC-in requirements
9V
Packaging data
Package length
3.39
Packaging content
Manual
| SKU | 214130 |
|---|---|
| MPN | ST122VGAU |
| Brand | Startech |
| Product Condition | Brand New/Unused |
| Stock Availability | Available for Shipping |
