FREE SHIPPING on orders over $200 Australia Wide - some exclusions apply, click here for more details
NSW Lockdown: Our stores are open for your essential office equipment, with restrictions. Bankstown and Blacktown Stores are Click and Collect Only. Free Shipping* available Australia Wide on most orders over $200. Please allow for some delay in order processing and shipping. Please click here for more information.

StarTech 1000Base-LX/LH SM/MM SFP Fiber Transceiver LC

Item No:
245308
MPN:
SFPGLCLHSMST
$106.87
Delivery: Pre-order ETA 07/09/21
Pickup: Check availability
Payment options

The SFPGLCLHSMST Cisco Compatible Gigabit Fiber SFP Transceiver Module SM/MM LC is built to comply with MSA (Multi-Sourcing Agreement) standards to offer a cost-effective way to add, replace or upgrade an SFP slot on your Gigabit fiber networking equipment or fiber media converter.

Supporting a 1000Base-LX/LH network with data rates up to 1.25 Gbps, this LC SFP/Mini-GBIC module can be installed into any fiber networking device with an MSA or Cisco compliant SFP port. The SFP transceiver supports both single-mode and multi-mode LC ports, with a single-mode distance of 10 km (6.2 mi.) and multi-mode distance of  550 m (1804 ft.). Delivering both convenience and scalability, this fiber transceiver is fully hot-pluggable, which enables you to install the module without interrupting network traffic or requiring a device reboot.

This 1310nm single-mode/multi-mode SFP module is compatible with the Cisco GLC-LH-SM transceiver. Also a perfect accessory for the StarTech.com PCI Express Open SFP NIC (PEX1000SFP2), or Gigabit POE Open SFP Media Converter (ET1110PSE) products.

Backed by a StarTech.com lifetime warranty and free lifetime technical support.

Connector(s)
Local Unit ConnectorsFiber Optic LC Duplex Female
Environmental
Humidity30~70% RH
Operating Temperature0?C to 70?C (32?F to 158?F)
Storage Temperature-40?C to 85?C (-40?F to 85?F)
Hardware
Industry StandardsIEEE 802.3z 1000BASE-LX/LH
WDMNo
Packaging Information
Shipping (Package) Weight45 g [1.6 oz]
Performance
Compatible Networks1000 Mbps (1 Gbps)
DDMNo
Fiber Operating ModeHalf/Full-Duplex
Fiber TypeMulti Mode
Single Mode
Max Transfer Distance10 km (6.2 mi)
Maximum Data Transfer Rate1.25 Gbps
MTBF3,092,408 hours
Wavelength1310nm
Physical Characteristics
Product Height10 mm [0.4 in]
Product Length60 mm [2.4 in]
Product Weight18 g [0.6 oz]
Product Width12 mm [0.5 in]
Special Notes / Requirements
NoteFor use in Gigabit fiber networking equipment and media converters
System and Cable RequirementsMSA or Cisco compliant SFP port
What's in the Box
Included in Package1.25 Gbps Single Mode LC SFP

Performance

SFP transceiver type
Fiber optic
Maximum data transfer rate The maximum speed with which data can be transmitted from one device to another.
1250 Mbit/s
Interface type
SFP
Multi-mode fiber (MMF) supported
Fiber optic connector This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
SFP transceiver standard
LH,LX
Maximum transfer distance The greatest distance over which the data/signal can be transferred.
10000 m
Wavelength The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
1310 nm
Networking standards The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3z
Duplex system A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.
Full,Half
Digital Diagnostics Monitoring (DDM)
Wavelength-division multiplexing (WDM)

Features

Product colour The colour e.g. red, blue, green, black, white.
Stainless steel
Hot-swap
Mean time between failures (MTBF) Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.
3092408 h
RoHS compliance The Restriction of Hazardous Substances (RoHS) Directive aims to restrict certain dangerous substances commonly used in electrical and electronic equipment. Any RoHS compliant product is tested for the presence of Lead (Pb), Cadmium (Cd), Mercury (Hg), Hexavalent chromium (Hex-Cr), Polybrominated biphenyls (PBB), and Polybrominated diphenyl ethers (PBDE). PBB and PBDE are flame retardants used in several plastics. For Cadmium and Hexavalent chromium, there must be less than 0.01% of the substance by weight at raw homogeneous materials level. For Lead, PBB, and PBDE, there must be no more than 0.1% of the material, when calculated by weight at raw homogeneous materials. Any RoHS compliant component must have 100 ppm or less of mercury and the mercury must not have been intentionally added to the component. In the EU, some military and medical equipment are exempt from RoHS compliance.
Certification
CE, FCC, UL

Power

Power consumption (typical) Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
1 W

Operational conditions

Operating temperature (T-T) The minimum and maximum temperatures at which the product can be safely operated.
0 - 70 °C
Storage temperature (T-T) The minimum and maximum temperatures at which the product can be safely stored.
-40 - 85 °C
Operating relative humidity (H-H)
30 - 70%

Weight & dimensions

Width The measurement or extent of something from side to side.
12 mm
Depth The distance from the front to the back of something.
60 mm
Height The measurement of the product from head to foot or from base to top.
10 mm
Weight Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
20 g

Packaging data

Number of products included The number of products that are included in the package.
1 pc(s)
Package width The distance from one side of the packaging to the other.
119 mm
Package depth The distance from the front to the back of the packaging.
93 mm
Package height The distance from the top to the bottom of the packaging.
33 mm
Package weight Weight of the packaged product.
46 g

Other features

Package length
4.53
Specifications
SKU 245308
MPN SFPGLCLHSMST
Brand Startech
Product Condition Brand New/Unused