NSW Lockdown: Our stores are open for your essential office equipment, with restrictions and additional policies to keep you safe. Bankstown Store is Click and Collect Only. Free Shipping* available Australia Wide on most orders over $200. Please allow for some delay in order processing and shipping. Please click here for more information.
This 60W PoE Injector + PoE Splitter Kit comes with a 60W Power over Ethernet injector, adding PoE via PoE.60 Watt Ultra Power Over EthernetCompliant with IEEE 802.3bt and supporting up to 60 watts of PoE, you can do more than just power your IP phone or wireless router. 60W PoE can support your higher-powered devices such as thin clients, POS systems, laptops or digital signage, from up to 100 meters away.Easy to DeployThe PoE injector and PoE splitter are both simple to set up. Supporting plug-and-play installation, they also feature a compact, all-in-one design, and a durable, wall-mountable metal housing. The PoE splitter's 12V/19V/24V DIP switch on the front panel offers either 24V DC power to industrial equipment or 12V/19V DC output to common network devices, increasing the number of product applications.StarTech.com Networking IOStarTech.com offers networking products that extend your networks to remote locations at extreme distances, for maximum network scalability. This Port 60W PoE Injector + PoE Splitter Kit is backed by a 2-year warranty and free lifetime North American based multilingual technical support.
RJ-45 (PoE+) Female
5% to 90% Relative Humidity, non-condensing
0 to 50 degrees C
-10 to 70 degrees C
IEEE 802.3 10BASE-T
IEEE 802.3ab 1000BASE-T
IEEE 802.3af PoE
IEEE 802.3at PoE+
IEEE 802.3bt PoE++ (4PPoE)
IEEE 802.3u 100BASE-T
PoE in use
PoE Usage 20W/40W/60W+
70 mm [2.8 in]
28.4 cm [11.2 in]
33.4 cm [13.1 in]
Shipping (Package) Weight
1.9 kg [4.1 lb]
No support flow control (Ports are all pin to pin pass)
Maximum transfer distance
The greatest distance over which the data/signal can be transferred.
Data transfer rate
Rate at which data can be transferred, usually measured in units per second. May vary with network configurations.
Auto MDIX IEEE
Jumbo frames support
Flow control support
Plug and Play
Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Mean time between failures (MTBF)
Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.
The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
Ethernet LAN (RJ-45) ports
Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
The socket/plug where the DC electricity supply connects to the device.
The colour e.g. red, blue, green, black, white.
What the casing of the product is made of.
The Restriction of Hazardous Substances (RoHS) Directive aims to restrict certain dangerous substances commonly used in electrical and electronic equipment. Any RoHS compliant product is tested for the presence of Lead (Pb), Cadmium (Cd), Mercury (Hg), Hexavalent chromium (Hex-Cr), Polybrominated biphenyls (PBB), and Polybrominated diphenyl ethers (PBDE). PBB and PBDE are flame retardants used in several plastics. For Cadmium and Hexavalent chromium, there must be less than 0.01% of the substance by weight at raw homogeneous materials level. For Lead, PBB, and PBDE, there must be no more than 0.1% of the material, when calculated by weight at raw homogeneous materials. Any RoHS compliant component must have 100 ppm or less of mercury and the mercury must not have been intentionally added to the component. In the EU, some military and medical equipment are exempt from RoHS compliance.
CE, FCC, PSE, UL
AC input voltage
The voltage of the AC electricity that is inputted into the product.
100 - 240 V
Power consumption (typical)
Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
Power over Ethernet (PoE)
The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Total Power over Ethernet (PoE) budget
Power over Ethernet (PoE) voltage range
12 - 24 V
Included power plug types
Operating temperature (T-T)
The minimum and maximum temperatures at which the product can be safely operated.
0 - 50 °C
Storage temperature (T-T)
The minimum and maximum temperatures at which the product can be safely stored.
-10 - 70 °C
Operating relative humidity (H-H)
5 - 90%
Weight & dimensions
The measurement or extent of something from side to side.
The distance from the front to the back of something.
The measurement of the product from head to foot or from base to top.
Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
The distance from one side of the packaging to the other.
The distance from the front to the back of the packaging.
The distance from the top to the bottom of the packaging.