FREE SHIPPING on orders over $200 Australia Wide - some exclusions apply, click here for more details
NSW Lockdown: Our stores are open for your essential office equipment, with restrictions. Bankstown and Blacktown Stores are Click and Collect Only. Free Shipping* available Australia Wide on most orders over $200. Please allow for some delay in order processing and shipping. Please click here for more information.

APC Standby UPS 550VA (8)Outlets Surge Board Design

Item No:
414267
MPN:
BE550G-AZ
$160.87
Delivery: Pre-order ETA 08/10/21
Pickup: Check availability
Payment options
APC BE550G-AZ; Output power capacity: 550 VA, Output power: 330 W, Input frequency: 50/60 Hz; Battery recharge time: 16 h; Product colour: Black, Cable length: 1.83 m, Certification: A-tick, C-tick, CE, Telepermit; Weight: 6 kg; Dimensions (WxDxH): 224 x 311 x 89 mm, Output voltage note: 47 - 63 Hz, Nominal input voltage: 230 V
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance.
Data-line Protection
Protection of data lines (Ethernet, Coaxial and Phone lines) ensures complete protection of your equipment from surges. It is very important to protect your equipment from 'back door' surges traveling through data lines, as they can be as damaging to your equipment as surges traveling over power lines.
10/100 BaseT Connection
Connect the device to a network using a 10 or 100 BaseT connection.
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment.
Cold-start capable
Provides temporary battery power when the utility power is out.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Audible alarms
Provides notification of changing utility power and UPS conditions.
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UL, FCC, CE, C-Tick approvals.
Adjustable voltage sensitivity
Provides the ability to adapt the Power Conditioner for optimal performance in specific power environments or generator applications.
Battery replacement without tools
Allows quick, easy battery replacement.

Features

Output power capacity The maximum power that the device can produce.
550 VA
Output power The power that the device can produce.
330 W
Input frequency The frequency (Hz) which is required to power the product.
50/60 Hz
Surge energy rating A surge protector is an appliance designed to protect electrical devices from voltage spikes. A surge protector attempts to limit the voltage supplied to an electric device by either blocking or by shorting to ground any unwanted voltages above a safe threshold. The surge energy rating is a measure of how much energy a surge protector can theoretically absorb in a single event, without failure.
310 J

Ports & interfaces

Ethernet LAN (RJ-45) ports Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
3

Battery

Battery recharge time Approximate time required to recharge the battery from completely empty to completely full
16 h

Design

Cable length How long the cable is.
1.83 m
Product colour The colour e.g. red, blue, green, black, white.
Black
Certification
A-tick, C-tick, CE, Telepermit

Operational conditions

Operating temperature (T-T) The minimum and maximum temperatures at which the product can be safely operated.
0 - 40 °C
Storage temperature (T-T) The minimum and maximum temperatures at which the product can be safely stored.
-15 - 40 °C
Operating relative humidity (H-H)
0 - 95%
Storage relative humidity (H-H)
0 - 95%

Weight & dimensions

Weight Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
6 kg

Other features

Dimensions (WxDxH) Dimensions of the product (Width x Depth x Height).
224 x 311 x 89 mm
Output voltage note
47 - 63 Hz
Nominal input voltage The voltage which the manufacturer recommends that the device needs to operate normally.
230 V
Specifications
SKU 414267
MPN BE550G-AZ
Brand APC
Product Condition Brand New/Unused
Product Use General