Feature | Description |
Technical Specs |
24-bit Analog-to-Digital conversion of analog inputs: | 96kHz sample rate |
24-bit Digital-to-Analog conversion of digital sources: | 96kHz to analog 7.1 speaker output |
24-bit Digital-to-Analog conversion of stereo digital sources: | 192kHz to stereo output |
16-bit to 24-bit recording sampling rates: | 8,11.025,16, 22.05, 24, 32, 44.1, 48 and 96kHz |
ASIO 2.0 support: | 16bit/44.1kHz,16-bit/48kHz, 24-bit/44.1kHz 24-bit/48kHz and 24-bit/96kHz with direct monitoring |
Enhanced SoundFont support: | Up to 24-bit resolution |
X-RAM: | 64MB |
Audio Performance(Rated Output @ 2Vrms, Typical Value) |
Signal-to-Noise Ratio (20kHz Low-pass filter, A-Weighted): | Stereo Output 109dB
Front and Rear Channels 109dB
Center, Subwoofer and Side Channels 109dB |
Total Harmonic Distortion + Noise at 1kHz (20kHz Low-pass filter): | 0.004% |
Frequency Response (-3dB, 24-bit/96kHz input ): | 10Hz to 46kHz |
Frequency Response (-3dB, 24-bit/192kHz input): | 10Hz to 88kHz (Stereo only) |
Connectivity |
Line in / Microphone In: | Shared 1/8" mini jack |
Speaker Out: | 4x 1/8" mini jacks |
Optical Out: | TOSLINK1 |
Optical In: | TOSLINK |
Intel HD Audio Compatible Front Panel Header: | 2x 5-pin |
Creative proprietary AND_EXT connector: | Connects to one end of the AND_EXT cable. Connect the other end to the AND_EXT connector on the Sound Blaster X-Fi I/O Drive. |
Creative proprietary DID_EXT connector: | Connects to one end of the DID_EXT cable. Connect the other end to the DID_EXT connector on the Sound Blaster X-Fi I/O Drive. |
I/O Drive Connectivity |
Auxiliary input: | Two RCA jacks |
Headphone output and volume control: | 3. 50 mm (1/8-inch) stereo jack |
Microphone input: | 3. 50 mm (1/8-inch) stereo jack |
