The BiPAC 7800NL series is a compact ADSL2+ Router that offers users expanded wireless coverage and speedy connection at affordable cost. The integrated 802.11n Wireless Access Point supports faster wireless speeds up to 300Mbps. It can automatically adopt the optimal connection to deliver smooth, constant signal reception even if obstacles are present. Robust Firewall security is featured to protect Internet access against hacker attacks and the Quality of Service is to prioritize queues and traffic for applications such as music downloads, online gaming, video streaming and file sharing. With ease of use setup and friendly User Interface make the BiPAC 7800NL a perfect unit for home and SOHO users.
ADSL Compliance
- Compliant with ADSL Standard
- Full-rate ANSI T1.413 Issue 2
- G.dmt (ITU G.992.1)
- G.lite (ITU G.992.2)
- G.hs (ITU G.994.1)
- ADSL over ISDN / U-R2 - Compliant with ADSL2 Standard
- G.dmt.bis (ITU G.992.3)
- ADSL2 Annex M (ITU G.992.3 Annex M) (BiPAC 7800NL A only)
- Compliant with ADSL2+ Standard
- G.dmt.bis plus (ITU G.992.5)
- ADSL2+ Annex M (ITU G.992.5 Annex M) (BiPAC 7800NL A only)
Network Protocols and Features
- NAT, static routing and RIP-1 / 2
- Universal Plug and Play (UPnP) Compliant
- Dynamic Domain Name System (DDNS)
- Virtual Server and DMZ
- SNTP, DNS relay and IGMP proxy
- IGMP snooping for video service
- Management based-on IP protocol, port number and address
Firewall
- Built-in NAT Firewall
- Stateful Packet Inspection (SPI)
- Prevents DoS attacks including Land Attack, Ping of Death, etc.
- Remote access control for web base access
- Packet Filtering - port, source IP address, destination IP address, MAC address
- URL Content Filtering - domain name detection in URL string
- MAC Filtering
- Password protection for system management
- VPN pass-through
Quality of Service Control
- Supports the DiffServ approach
• Traffic prioritization and bandwidth management based-on IP protocol, port number and address
Quality of Service Control
- Supports the DiffServ approach
- Traffic prioritization and bandwidth management based-on IP protocol, port number and address
ATM, PTM and PPP Protocols
- ATM Adaptation Layer Type 5 (AAL5)
- Classical IP over ATM (IPoA) (RFC 2225 / RFC 1577)
- Bridged or routed Ethernet encapsulation
- VC and LLC based multiplexing
- PPP over Ethernet (PPPoE)
- PPP over ATM (RFC 2364)
- MAC Encapsulated Routing (RFC 1483 MER)
- OAM F4 / F5
IPTV Applications
- IGMP Snooping
- Virtual LAN (VLAN)
- Quality of Service (QoS)
- IGMP Snooping & IGMP Proxy
- VLAN MUX support
Wireless LAN
- Compliant with IEEE 802.11n, 802.11g and 802.11b standards
- 2.4 GHz - 2.484 GHz frequency range
- Up to 300Mbps wireless operation rate
- 64 / 128 bits WEP supported for encryption
- WPS (Wi-Fi Protected Setup) for easy setup
- Wireless Security with WPA-PSK / WPA2-PSK support
- WDS repeater function support
- 802.1x radius supported
- Web-based GUI for WLAN on/off switch
Management
- Easy Sign-On (EZSO) and Auto-scan ADSL settings
- Web-based GUI for remote and local management
- Firmware upgrades and configuration data upload and download via web-based GUI
- Embedded Telnet server for remote and local management
- Available Syslog
- Supports DHCP server / client / relay
- TR-069 supports remote management
- SNMP v1/v2/v3 supports remote and local management
Hardware Specifications
Physical Interface
WLAN: 2 x 2dbi detachable antennas
DSL: ADSL port
Ethernet: 4-port 10 / 100Mbps auto-crossover (MDI / MDI-X) Switch
Factory default reset button
WPS push button
Power jack
Power switch
Physical Specifications
Dimensions : 9.04" x 6.10" x 1.46" (229.5mm x 155mm x 37mm)
Power Requirements
Input: 12V DC, 1A
Operating Environment
- Operating temperature: 0 - 40℃
- Storage temperature: -20 - 70℃
- Humidity: 20 - 95% non-condensing
Models & Supported Standards
- BiPAC 7800NL A: Annex A and Annex M (Annex A and Annex M: ADSL over POTS)
- BiPAC 7800NL U: Annex B and U-R2 (Annex B and U-R2: ADSL over ISDN)
Notes:
1. The router may require firmware modification for certain ADSL2 / 2+ / Annex M DSLAMs.
2. IPTV application may require subscribing to IPTV services from a Telco / ISP.
3. Only upon request for Telco / ISP tender projects.
4. Specifications in this datasheet are subject to change without prior notice.
